Mobile pallet inverter
Engineering and simplicity in one machine.
It comes to the pallet instead of the other way round. The pallet is changed at floor level with a pallet truck, powered stacker or forklift truck — and the machine can be moved to wherever the job is today.
- Capacity
- 1,000–1,500 kg
- Fork spread
- 600–2,000 mm
- Traction
- 2 kW electric motor
- Hydraulics
- 3 kW with pump
Four steps — the machine comes to the pallet
The mobile solution is chosen when the operator handles the pallets themselves, and when the job is not always in the same place.
The machine is moved to the pallet
The mobile pallet inverter is driven over to the pallet.
The load is clamped
The forks or the clamp close around the product and hold it in place.
The load is inverted
The machine inverts the load, so the old pallet comes free.
The pallet is changed
The machine changes the pallet at floor level and sets the load back down.
See it at work
Filmed at a customer's site. This is the machine as it runs day to day.
- Moved to wherever the job is
No fixed installation — the machine follows the work.
- Pallet change at floor level
The pallets are handled with a pallet truck, powered stacker or forklift truck.
- Fewer operating errors
The latest generation of mechanics and electronics makes the work easier.
Three models
MPT inverts with forks, MPS clamps the load from the side. The choice depends on the product and on how high it has to be lifted.
Data sheetScan or click
Optional equipment for the mobile pallet inverter
The machine is built around where it will stand and what it will run. These are the options customers most often add.
Automatic cycle
The operator presses start and the machine runs through the whole sequence by itself. That frees up time to handle pallets or other tasks while it runs.
Automatic operation requires guarding, so that no one can get under the machine while it runs — typically safety fencing or light curtains.
Galvanising
Often chosen for medical and food applications, where the product can come into contact with the machine. Also an advantage if the machine has to stand in a damp environment.
Compressor
Recommended if you have no compressed air already. We fit a small, low-noise compressor on the machine.
External start or pull cord
Lets the operator start the machine with a pull cord or an external button — for example while seated in the forklift truck.
Safety and warning lights
Uses colour to show whether the machine is running, has stopped, or needs service.
Spare parts package
The most essential parts held in stock at your site, so a stoppage does not turn into waiting for a delivery.
On top of that comes the service agreement — planned visits, a fixed price and the same technician every time. See what it covers →
Shall we look at your setup?
Tell us what you handle and how many places the machine has to be used. We will come back with a model recommendation.